Hollywood Turban

My daughter asked me to make her an old Hollywood-style turban like this one from Amazon, but I couldn't find a pattern, so I decided to make my own.

Ladies Winter Warm Sparkle Floral Turban Soft Knit Beanie Skull Hat Cap

Materials

• I Hook
• Red Heart Soft yarn, Black
• Tapestry needle
• Styrofoam head
• straight pins
• Simplicity slide on headband decor or some other type of applique
• needle
• thread

Gauge
4 sts per inch, 3 inches equals 7 rows

Abbreviations
Ch(s)--chain(s)              Hdc(s)--half double crochet(s)         BL--back loop
Hdc2tog-half double crochet 2 stitches together

For this pattern I used half double crochets, but I crocheted them in a different loop than normal to make the stitch look more like knitting.  Some people call this the Camel Stitch.  The link is to a video tutorial on how to do the stitch.  This may help you understand the instructions better.  Mikey is doing the stitch in the round so he doesn't turn the rows, but the same loop that he shows you in the back of the stitch also exists in the front of the stitch.  Since I'm doing the stitch in black it will be hard to distinguish in the pictures, but this is how the stitch should look. This is the right side. The wrong side looks flat.

Right Side Up

Surface Braid Hat by Amy Depew

Turban Piece, done in the flat
Ch 122.
Row 1:  Hdc in the BL of the 3rd ch from the hook and in each BL of each ch to the end of the ch.  It should measure about 34 1/2", (120 hdcs)

Row 2: Ch 2, turn, Hdc in 3rd loop on the back of the 1st st and in each 3rd loop to the end of the row. (120 hdcs)

Row 3:  Ch2 turn. Hdc in 3rd loop on the front of the first st and in each 3rd loop to the end of the row. (120 hdcs)

Row 4: repeat Row 2.
Row 5: repeat Row 3.
Row 6: repeat Row 2.
Row 7: repeat Row 3.

Row 8: repeat Row 2.
Row 9: repeat Row 3.

Row 10:  Ch 2, turn, hdc in 3rd loop on the back of the 1st st and in the next 31 sts. (32 hdcs)
Row 11:  Ch2 turn. hdc2tog in 3rd loop on the front of the first 2 sts, hdc in the 3rd loop on the front of the next 28 sts, hdc2tog in 3rd loop on the front of the next 2 sts. (30 hdcs)
Row 12:  Ch2 turn. hdc2tog in 3rd loop on the back of the first 2 sts, hdc in the 3rd loop on the back of the next 26 sts, hdc2tog in 3rd loop on the back of the next 2 sts. (28 hdcs)
Row 13:  Ch2 turn. hdc2tog in 3rd loop on the front of the first 2 sts, hdc in the 3rd loop on the front of the next 24 sts, hdc2tog in 3rd loop on the front of the next 2 sts. (26 hdcs)
Row 14:  Ch2 turn. hdc2tog in 3rd loop on the back of the first 2 sts, hdc in the 3rd loop on the back of the next 22 sts, hdc2tog in 3rd loop on the back of the next 2 sts. (24 hdcs)

Row 15:  Ch2 turn. hdc2tog in 3rd loop on the front of the first 2 sts, hdc in the 3rd loop on the front of the next 20 sts, hdc2tog in 3rd loop on the front of the next 2 sts. Fasten off leaving a long tail for sewing. (22 hdcs)

Row 16: Attach yarn in the 5th ch on the opposite side of the piece (right side up.) Ch 2, hdc in the back post of the same ch.  Hdc in the back post of the next 29 chs. (30 hdcs)

Row 17:  Ch 2, turn, hdc2tog in the 3rd front loop of the 1st 2 sts, hdc in front 3rd loop of next 26 sts, hdc2tog in 3rd front loop of next 2 sts. (28 hdcs)

Row 18:  Ch 2, turn, hdc2tog in the 3rd front loop of the 1st 2 sts, hdc in back 3rd loop of next 24 sts, hdc2tog in 3rd back loop of next 2 sts. (26 hdcs)

Row 19:  Ch 2, turn, hdc2tog in the 3rd back loop of the 1st 2 sts, hdc in front 3rd loop of next 22 sts, hdc2tog in 3rd back loop of next 2 sts. (24 hdcs)

Row 20:  Ch 2, turn, hdc2tog in the 3rd front loop of the 1st 2 sts, hdc in back 3rd loop of next 20 sts, hdc2tog in 3rd back loop of next 2 sts. (22 hdcs)

Row 21:  Ch 2, turn, hdc2tog in the 3rd back loop of the 1st 2 sts, hdc in front 3rd loop of next 18 sts, hdc2tog in 3rd back loop of next 2 sts. (20 hdcs)

Row 22:  Ch 2, turn, hdc2tog in the 3rd front loop of the 1st 2 sts, hdc in back 3rd loop of next 16 sts, hdc2tog in 3rd back loop of next 2 sts. Fasten off leaving a long tail for sewing. (18 hdcs)

Assembly

Pin the bottom edge of the turban piece to the back of the Styrofoam head at the base of the neck. Make sure the piece is turned right side up. (see picture of blued stitching at top.)

Put another pin in the top back of the head to hold it in place.

Wrap the tail around the right side of the head

and pin it to run along the base of the piece.

Pull the tail around to the left side of the head and then bring it around to the front of the head. 

Then tuck it under at the front of the head.

Pull it in tightly.

There will be 2 gaps on either side of the head, you will need to sew these together.  

Start sewing the gap together on the right side of the head, pinch it together as you go, pushing the smaller piece under the tail that you wrapped around the head.

Continue sewing down the tail all the way around the head.

It will look something like this.

Sparkle Floral Turban

Once you have finished sewing down the tail, weave in the ends, then remove the turban from the head and turn it inside out and sew down any loose ends.

Then sew on the applique with the needle and thread.

Happy Hooking!

YOU MAY ALSO LIKE:

Turbanesque Headband

Fascinator Hat

Heart Headband

Fisherman Hooded Scarf

Turbanesque Headband

When I was trying to come up with a pattern stitch to use for my Pillowghan I tried this Slant Stitch from Suzies Stuff.  I wasn't quite satisfied with it for the Pillowghan, but my daughter really liked it and told me she wanted me to make her a wide headband with this stitch.  She wanted it to have a band that pulled it together at the top, so it sort of looks like a turban.  She even wanted me to use the same yarn.  So here's a nice quickie pattern.

Materials

• Bernat Softee Chunky Twists yarn, Tropic Twist
• Red Heart Soft yarn, Turquesa
• I Hook
• Tapestry Needle

Gauge

3 dcs + 1 SLANT st=1 1/4"
2 dc rows = 1"
3 scs = 1" with Bernat Softee Chunky Twists yarn
5 scs = 1" with Red Heart Soft Yarn


Special Stitches

Slant Stitch--SLANT--Yarn over (YO), insert hook in missed stitch (st), YO, pull up a long loop all the way up to the height of the other sts, YO pull through 2 loops, YO pull through last 2 loops.

YO

Insert hook in missed stitch

YO

Pull up loop to level of the other stitches

YO

Pull through 2 loops, YO again

Pull through last 2 loops

Abbreviations
YO--yarn over         ch(s)--chain(s)                  sc(s)--single crochet(s)
sk--skip                   dc(s)--double crochet(s)   st(s)--stitch(es)
SLANT--slant stitch           hdc(s)--half double crochet

Headband
Ch 72.
Row 1: Sc in second sc and in each sc to end. Turn. (71 sts)

Row 2: Ch 2, dc in same st, sk next st, *dc in next 3 sts, SLANT, sk next st* 16 times, sk st, dc in last st. Turn. (70 sts)

Row 3: repeat Row 2.

Row 4: Ch 1, sc in same st and next 16 sts, hdc in next 9 sts, dc in next 19 sts, hdc in next 9 sts, sc in next 16 sts. Turn. (70 sts)

Row 5: Ch 1, sc in same st and next 15 sts, hdc in next 9 sts, dc in next 19 sts, hdc in next 9 sts, sc in next 17 sts. Turn (70 sts)

Row 6: Repeat Row 4.

Row 7: Ch 1, sc in same st and in each st across. Turn. (70 sts)

Rows 8 and 9:  Repeat Row 2. At the end of Row 9, fasten off leaving a long tail for weaving in.

Sew ends of headband together using long tail.

Small Band

Ch 6.
Row 1:  Sc in second ch from hook and in each ch across. Turn. (5 scs)

Row 2:  Ch 1, sc in same st and in each st across. Turn. (5 scs)

Row 3 to Row 14:  Repeat Row 2, on Row 14, fasten off leaving a long tail for sewing.

To attach the small band, first fold the front of the headband (opposite from where you sewed the seam.)

Then wrap the small band around the headband at the mid point with the ends going around the back of the fold.

Then sew the small band together, catching some of the headband strands too, to hold the small band in place.

Weave in the ends and cut the end off.

You May Also Like:

     

Quick Ripple Cowl

Scrap Heat Gloves

Fascinator Hat